D Link Router For Mac

| 29-03-2021
[RAND-1-100] Comments

Oct 01, 2020 1 The D-Link DI-634M router has two default access accounts, an administrator-level account (username of admin) that is used for router management and a user-level account (username of user) that is used to view data but not make changes. Step 3: From the Configure MAC Filtering drop down, select your method of MAC filtering. Turn MAC Filtering OFF. MAC Filtering ON and ALLOW computers listed to access the network. MAC Filtering ON and DENY computers listed to access the network. Step 4: Select your computer from the List or enter the MAC addresses manually. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. Top comment ' 3) The shared printer, USB'd to the router would work on only one PC/Mac at a time.I purchased this router to upgrade my G type router this was a ac router dual band 2.4 and 5 gig running at same time which is nice my speed test with the g router was running at 20 meg download 3 meg upload with the new ac router I'm getting 65 meg download 5.5 meg upload that is with'. How to filter MAC address in d-link Router how to block unwanted device it is D-link 2750U but try all router same type function.

If your ISP is having issues with its DNS service, switching to OpenDNS' DNS will get you back online in just a few quick steps. Follow the instructions for your operating system or router below.

If you have friends, family, or colleagues who have the same ISP as you, send them this info to help them get back online. Text them or call them with the IP address http://208.69.38.205.
Or, tell your Twitter followers that they can get back online by following the instructions on http://208.69.38.205.

Questions? Tweet @OpenDNS for assistance getting set up.

D link router for mac installer

Where will you be setting up OpenDNS?

Mac OS X

  1. Go to System Preferences.
  2. Click on Network.
  3. Select the first connection in your list and click Advanced.
  4. Select the DNS tab and add 208.67.222.222 and 208.67.220.220 to the list of DNS servers.
  5. Click OK

Windows 10

  1. Open the Control Panel.
  2. Click Network and Internet.
  3. Click Network and Sharing Center.
  4. On the left pane, click Change adapter settings.
  5. Right-click the network interface connected to the internet, then click Properties.
  6. Choose Internet Protocol Version 4 (TCP/IPv4).
  7. Click Properties.
  8. Click Use the following DNS server addresses.
  9. Click Advanced.
  10. Enter 208.67.222.222 and 208.67.220.220 in the DNS server fields.
  11. Click OK, then click Close.

Windows 7

  1. Click the Start Orb, then select Control Panel.
  2. Click on Network and Sharing Center.
  3. Click on your primary connection or Local Area Connection under Active Networks.
  4. Click the Properties button.
    Windows 7 may prompt you for permission to make network setting changes.
  5. Highlight 'Internet Protocol Version 4' and click Properties.
  6. Click the radio button 'Use the following DNS server addresses:' and type 208.67.222.222 and 208.67.220.220 in the Preferred DNS server and Alternate DNS server fields.
  7. Click OK button, then the Close button, then Close again. Finally, close the Network and Sharing Center window.
    At this point, we highly suggest that you flush your DNS resolver cache and web browser caches to ensure that your new configuration settings take effect.

Windows XP

  1. Select Control Panel from the Start menu.
  2. Click Network Connections from the Control Panel choices.
  3. Choose your connection from the Network Connections window.
    If you have more than one, choose your default/current connection.
  4. Click Properties button.
  5. Select Internet Protocol (TCP/IP) and click Properties.
  6. Click the radio button Use the following DNS server addresses and type 208.67.222.222 and 208.67.220.220 in the Preferred DNS server and Alternate DNS server fields.
  7. Click OK

Windows Vista

  1. Click the Start Orb, then select Control Panel.
  2. Click on View network status and tasks.
  3. Click on View status.
  4. Click the Properties button.
  5. Vista may ask for your permission to make changes. If so, click the Continue button.
  6. Select Internet Protocol Version 4 (TCP/IPv4), then click the Properties button.
  7. Click the radio button 'Use the following DNS server addresses:' and type in OpenDNS addresses, 208.67.222.222 and 208.67.220.220, in the Preferred DNS server and Alternate DNS server fields.
  8. Click the OK button, then the Close button, and the Close button again. Close the Network and Sharing Center window.

Generic Router

  1. Open the preferences for your router.

    Often, the preferences are set in your web browser, via a URL with numbers (example: http://192.168.0.1). You may need a password.

    If you're like us, and you set the router password long ago and cannot remember it now, you can often reset the password to the manufacturer default by pressing a button on the router itself.

    Or preferences may be set via specific application for your router, which you installed on your computer when you added the router.

  2. Find the DNS server settings.
    Scan for the letters DNS next to a field which allows two or three sets of numbers, each broken into four groups of one to three numbers.
  3. Put in the OpenDNS server addresses, 208.67.222.222 and 208.67.220.220, as your DNS server settings and save/apply.

Linksys Router

  1. Visit the router's IP address in a new browser window.
    http://192.168.1.1 is the default Linksys router IP address.
  2. Enter the Network password.
    The 'Enter Network Password' window will appear. Skip user name and type the router's password (admin is the default password, if you haven't changed it) and click the OK button.
  3. Type in OpenDNS addresses, 208.67.222.222, 208.67.220.220, in Static DNS 1 and Static DNS 2 fields.
  4. Click Save Settings button.

Netgear Router

  1. Type the router's setup URL (http://www.routerlogin.net, http://192.168.0.1 or http://192.168.1.1) into a web browser address bar.
    http://192.168.1.1 is the default Netgear router IP address.
  2. Enter the password.
  3. Type in OpenDNS addresses, 208.67.222.222 and 208.67.220.220, in Primary DNS and Secondary DNS fields.
  4. Click Apply button.
  5. Wait for the settings to be updated.

D-Link Router

  1. Visit the router's IP address (http://192.168.0.1) in a new browser window.
    If you are attempting to configure a D-Link router, take note of your computer's Default Gateway IP address. The Default Gateway is the IP address of the D-Link router. By default, it should be 192.168.0.1. Most D-Link devices use the 192.168.0.X range.
  2. Enter the router password.
    Note: if you have not changed the original settings, the default username is admin and the password is blank (nothing).
  3. Click on the Manual Internet Connection Setup button at the bottom.
  4. Enter the OpenDNS addresses, 208.67.222.222 and 208.67.220.220, in Primary DNS Server and Secondary DNS Server fields.
  5. Click Save Settings button at the top.

I know the feeling when any random and unknown people uses your wifi network, making your wifi speed slow and you do not have any idea how to block them from your wireless network.

Believe me… After reading this article, you will be able to block wifi users in the d-link router using MAC address filtering option.

I will show you exactly how to block a device on D-link 2750U, D-link 2730U, D-link DIR series , D-link WBR series wifi router.

So Let’s jump in and I will cover the entire post in 2 steps.

D Link Router For Mac Os

First thing first. Identify who is on your wifi network by using software like ‘Who is on my wifi’ or ‘Fing’.

Here’s a screenshot of ‘who is on my wifi’ software that I use to determine mac addresses of all the connected devices on my wifi network.

Once you find out the list of MAC addresses of all the devices connected to your network, next you have to check for the mac addresses of your own devices. Because this is the only way you filter out the unknown devices.

Don’t worry….. if you do not know how to check mac addresses of your smartphone or PC/Laptop. Check it out below. It will take not more than 2-3 min to figure it out.

  • Find MAC address of your Android or iPhone.
  • Find MAC address of your PC/Laptop and Mac.

After finding out the mac addresses of all the users on your network, I encourage you to prepare a list. This is not absolutely necessary, but believe me, it will make your job easier.

Here’s an example how I did it.

You can download this template file if u wish.

As there are many different D-Link routers out there with a different user interface, so I have selected some most popular D-link router to cover on this post.

And I am pretty much sure that even if your router is not listed below, you will be able to figure it out how to block wifi users in your D-link routerafter reading the complete post.

D-Link DSL 2750U

Allow your Devices

Firstlogin to router setting or configuration page.

Login to your modem by typing 192.168.1.1 on browser address bar → when prompted for username and password, put both as ‘admin‘.

Click on Advanced → Advanced Wireless → MAC filtering.

Click on Enable Access Control mode ( This will instantly block all the wifi users on your network).

Now click on Add to add Mac address of the device that you want to allow the wifi connection and hit Apply.

Similarly, put all the MAC addresses that you want to allow on your wifi network.

Disallow or Block unknown devices

You can also block the mac addresses of the devices that you do not want on your network. To do so:

Login to your modem setting page by putting 192.168.1.1 on browser → Enter admin both on username and password field.

GO to Advanced → parental control → click on Block MAC address → Click Add.

username »»Any Name.

Click on Other MAC Address »»Enter MAC address that you want to restrict from your wifi network (e.g XX:XX:XX:YY:YY:YY ).

Now, under Manual schedule, you have two options to choose, you can either block it all the time or on a certain day.

Click on All Day and All week if you want to block them forever and hit Apply.

Repeat this step if you want to block more devices.

D-LINK 2730U

Allow your devices

Log in to router by typing 192.168.1.1 on browser → Put admin as both username and password → Advanced → Parental Control → Mac Filter → Select Whitelist → Click Add

Username »»Any Name you want.

Click on Other MAC Address »»Enter MAC address that you want to allow. (Mac address format: XX:XX:XX:YY:YY:YY ).

Hit Save settings or Apply

P.S: If you whitelist a MAC address, it means you are allowing the device on the network.

Disallow or Block unknown devices

Login to router → Advanced → Parental Control → Mac Filter → Select Blacklist → Click Add.

Repeat the above steps that I have shown you.

P.S: If you blacklist a MAC address, it means you are restricting or blocking the device on the network.

D-LINK DIR/WBR series Router

D-LINK DIR 600D-LINK DIR 615D-LINK WBR 1310D-LINK WBR 2310

Although blocking mac address on D-Link DIR or WBRseries router is almost similar to above-mentioned steps, still it is important to discuss these popular series routers

Here’s a link to an emulator that is worth checking.

Login to router by typing 192.168.0.1 in a browser’s address bar → Put Username as admin and password is blank(nothing) → Advanced → Network Filter/Mac Filter.

Select one option from the dropdown under configure MAC Filtering.

  • Option 1: Turn MAC filter off – This will allow all the users to be connected to your wifi network.
  • Option 2: Turn MAC filtering ON and ALLOW computers listed to access the network – select this option if you want to allow only the known devices to use your wifi.
  • Option 3: Turn MAC Filtering ON and DENY computers listed to access the network- If you select this option and Add MAC addresses below it, then these MAC addresses will get blocked from your network.

Once you select the option you want, the job gets easier for you here. Just select the name of the computer you want to add or block and then click on Save Settings. Or…

You can manually enter MAC addresses of the devices too.

D'link Router Mac Address

Don’t forget to match the MAC addresses that you have noted down before hitting the save button.

D-link Modem For Mac Setup

If you have liked this post and benefited from it, then please like our page on Facebook and follow us on Twitter and Google+. Don’t be shy to share this post if you find it useful. Keep visiting Bpedia for more exciting info. Ta-Ta.